The SR-3001DIN is a 12-36VDC constant voltage din rail mounted LED power repeater with 4 channels, up to 5A per output channel, which is designed to extend the power output and receive PWM signal control. By adding an additional power repeater, the controller can control from one to three times more LEDs, and an unlimited number of power repeaters can be connected together to extend the...

Professional 2-channel relay with Wi-Fi, LAN and Bluetooth connection, suitable for home and business automation with remote control. Official Shelly importer

FRIENT - SWITCH ON ZIGBEE CORD 3.0 The switch on a FRIENT cord allows you to activate or deactivate an electrical device remotely and measure its energy consumption.

Aeotec TriSensor 8 was developed to detect ambient values and movement and to transmit them with Z-Wave Plus.

Radio channel controller for remote control of low current equipment. It is used to activate electric locks, gates and swing gates, rolling shutters and blinds, and to restart modems and routers.  

The Strips Drip 800 with water leakage sensor + temperature alerts for Z-Wave is the perfect solution for monitoring any area at risk of water damage.

The FGDW-002 from Fibaro is a Z-wave PLUS window/door opening sensor fitted with a temperator sensor.This new version is more compact than the previous one.

With soft lines, a polished surface and small size, this smoke detector enables you to be alerted in the event of a fire.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Controlled return Triggers six pre-programmed actions. Different scenes can be launched by pressing the button between 1 and 5 times or by holding down the button.

Zigbee temperature and humidity sensor NodOn STPH-4-1-00 - Wireless, battery-free, 100% autonomous

The Multifunction Module PRO Zigbee allows you to control a garage door, a gate, a radiator, a socket, a boiler ...

Fibaro Smart Implant de Fibaro improves your equipment and makes it intelligent. 

Controlled return The FGD-212 dimmer micromodule will allow you to control a lamp or ceiling lamp remotely while keeping your existing switch.

The Meross Smart Wi-Fi Thermostat for Electric Underfloor Heating System MTS200HK (EU version) is the thermostat that allows homeowners to control and manage the temperature of their heated floors remotely through a smartphone app or via voice commands. Save your heating cost. Open window detection function. Up to 16A. Wi-Fi 2.4 GHz. ...

The RaZberry 2 is an expansion board that connects directly to the GPIO terminal of a Raspberry Pi board and turns it into a Z-Wave controller

Aqara Camera E1 is an affordable yet future-proof camera with a focus on smart home automation capabilities and ecosystem support. Supports WiFi 6 2.4 GHz and Apple HomeKit. 101° wide-angle lens and 1296p high definition Support for larger microSD capacities NAS recording support USB-C power port Personalized...

Monitor the amount of electricity consumed in your home with the Zigbee 3.0 smart energy meter (compatible with Jeedom and Home Assistant) 1P+N by Bituo Technik.

Z-Wave ON/OFF relay module Z-Wave+ with built-in energy meter - 1x2300W

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

  25% smaller than any other wireless dimmer on the market Smarten up your conventional lighting and control your lights remotely with Qubino Mini Dimmer. Its small size allows an easy and fast installation. 

Controlled return The Z-TRV-V01 Smart...

Controlled return Z-Wave ON/OFF relay module Z-Wave+...

Controlled return The Strips Drip 800...

TheAqara G2H PRO is a multifunction device that acts as an HD camera and Zigbee 3.0 home automation box. This camera is also compatible with Google Assistant, Apple Homekit, Alexa. It has motion detection, night vision, 146° wide-angle, two-way audio and a resolution of 2Mp. Official Aqara import

Wireless indoor siren that loudly notifies of an alarm during detector activation. It is installed indoors to warn of danger or deter intruders.  

The PiZiGate connected to your Rapsberry Pi allows you to integrate your ZigBee compatible objects into your home automation environment.  

Small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage.