The most efficient Z-Wave adapter for Home Assistant. Precisely tuned antenna for maximum range, latest generation Z-Wave 800 chipset, Long Range compatible. Plug-and-play installation and simplified migration. Elegant candlelight-shaped design that blends seamlessly into your decor. Official Supplier

RaspBee is a universal ZigBee gateway for Raspberry, which enables many Zigbee products to be combined. RaspBee can function without the Cloud or the internet. You keep all your data locally at home.

The SLZB-MR1 is an adapter that integrates the CC2652P7 and EFR32MG21 chips, enabling simultaneous management of Zigbee and Matter-over-Thread networks. Official supplier

The SMLIGHT SLZB-06 is a Zigbee 3.0 to Ethernet, PoE, USB or WiFi adapter designed to work with software systems such as Zigbee2MQTT and Home Assistant ZHA. It is particularly recommended for Zigbee2MQTT users. Official supplier

Control your Zigbee devices with the SONOFF Zigbee USB stick compatible with Home Assistant and Zigbee2MQTT.

Control your Zigbee devices with the SONOFF Zigbee USB flash drive compatible with Home Assistant and Zigbee2MQTT.

The professional all-in-one Zigbee gateway with triple connectivity (PoE, Wi-Fi, USB), integrated web console, and compatibility with Home Assistant, Zigbee2MQTT, openHAB, Homey, and all open-source platforms.

All-new 800 series Z-Wave long-range radio USB key: incredible signal, ultra-secure and fast network!

AQARA Hub M200 EU (HM-G03D) — Zigbee & Thread Gateway with IR Transmitter | One Hub, All Ecosystems. Unify your Matter, Thread, and Zigbee devices with a fast and reliable control center. Dual-band Wi-Fi 6, built-in IR, and PoE/USB-C power for a simple and future-proof installation. Compatible with Matter, Thread, Zigbee 3.0, Bluetooth Up to 128 connected...

Aqara Hub M100 (HM-G02D), Matter hub for Aqara and third-party devices, local automation, Thread and Zigbee

EnOcean USB controller allowing you to connect any compatible computer or home automation controller to EnOcean technology. The USB310 controller is also equipped with an SMA connector that can accommodate an antenna.

Control your devices with the SLZB-MRW10: multiprotocol Zigbee, Thread, Wi-Fi and Z-Wave (currently not certified by the Z-Wave alliance).

ConBee II is a universal ZigBee gateway, which enables many Zigbee products to be combined. ConBee can function without the Cloud or the internet. You keep all your data locally at home.

Interface with two potential free inputs to control io-homecontrol devices.

SLZB-MR3U is a Zigbee and Matter Over Thread dongle over Ethernet POE with 2 CC2674P10 + EFR32MG24 chipsets compatible with Zigbee2Mqtt and Home Assistant with USB-C or PoE power supply and USB over TCP function.

The SMLIGHT SLZB-MR1U is an intelligent LAN adapter that allows you to connect and manage remote USB devices while integrating Zigbee 3.0, Thread, Wi-Fi, and Bluetooth protocols, offering a modular and complete solution for advanced smart home installations. It builds on the solid foundation of the SLZB-MR1 by...

The RF Player radio interface connects all your wireless home automation devices running on the protocols Somfy RTS, Delta Dore X2D, Visonic, Chacon/DiO, ...

SMLIGHT SLZB-06Mg24 is an adapter designed to integrate your Zigbee 3.0 devices into your network via Ethernet, WiFi, or USB connections. Official supplier

EnOcean-USB-Controller, mit dem Sie jeden kompatiblen Computer oder Heimautomatisierungscontroller mit der EnOcean-Welt verbinden können. Modell mit einem SMA-Anschluss für eine externe Antenne ausgestattet. Wird mit einer 868-Mhz-Antenne geliefert.

The SMLIGHT SLZB-06M is a Zigbee 3.0 to Ethernet, PoE, USB or WiFi adapter designed to work with software systems such as Zigbee2MQTT and Home Assistant ZHA. Official supplier

GCE Electronics - Calibration kit for pH probe. Essential for accurate measurements with the x200pH

The SMLIGHT SLZB-06p10 is a versatile Zigbee adapter designed to connect Zigbee devices to Ethernet, USB, and WiFi networks. Optimized for smart home environments, this adapter supports Zigbee2MQTT and Home Assistant (ZHA), providing an ideal solution for both professional and home IoT installations. Multi-connectivity : Easily switch between Ethernet, USB,...

The RFXCOM RFX-433 interface will allow you to increase the RF 433MHz reception and transmission capabilities of your home automation system. Model with a secure microcontroller for managing bidirectional motors.

The programmable interface VELUX INTEGRA KLF 150 allows you to control your io-homecontrol® products from a home automation system, sensors, or wall buttons. Easy to program via a USB cable, it manages up to 5 individual motors or 5 groups of products, to centralize the control of your windows, shutters, and VELUX accessories.

The KNX IP Interface 731 is an interface between IP and KNX and can be used as programming interface for ETS® Software.

Energio is the only device you need to monitor your building's energy consumption. Simply install, connect and commission it to collect all the information from the building's energy meters and make it available on the Smarthome SA solution cockpit.

Z-Uno Shield is a multifunctional DIN-rail smart home device based on Z-Uno. It implements most useful features of Z-Uno and requires no soldering and no programming.

The KNX Modbus TCP Gateway 716 is a compact Gateway between KNX TP and Modbus TCP with 250 freely configurable data points.

Z-Uno 2 is an easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired...

The RaZberry 7 Pro from Z-Wave.Me is a daughter board for the Raspberry Pi that turns it into a Z-Wave controller. Model with external antenna.

The KNX IP Router 752 secure enables the secure forwarding (routing) of telegrams between different lines over a LAN (IP, Ethernet) as a fast backbone.

Z-Pi 7 is a daughter board designed to be installed directly on the Raspberry Pi microcomputer, to allow it to communicate with Z-Wave devices.

The KNX IP 732 secure interface serves as a secure interface between a local network (IP, Ethernet) and KNX, and can be used as a programming interface for ETS®. As a secure KNX interface (tunneling), the device prevents unauthorized access to the system. The connection between the PC and the interface is encrypted. The security option can be activated or deactivated in the ETS.

The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus.

The KNX IO 546.1 secure (1D1O) is a compact combined dimming/switching actuator with 1 dimming output for active electronic ballasts with a 0/1-10V interface and 1 bi-stable relay output.