Receiver module to connect Ajax detectors to wired and hybrid security systems. The device is integrated into any central unit with wired safety zones.
Receiver module to connect Ajax detectors to wired and hybrid security systems. The device is integrated into any central unit with wired safety zones.
Connected power consumption sensor: 1 substation Counting 1 substation (heating, cooling, ECS or power outlets) thanks to a TI Possibility to expand the installation and monitoring of consumptions thanks to our other compatible consumption sensors Display of consumptions on the iOS or Android TYDOM application (no ambient box required)
Connected power consumption sensor: 1 substation Counting 1 substation (heating, cooling, ECS or power outlets) thanks to a TI Possibility to expand the installation and monitoring of consumptions thanks to our other compatible consumption sensors Display of consumptions on the iOS or Android TYDOM application (no ambient box required)
FRIENT - ZIGBEE 3.0 MOTION DETECTOR + TEMPERATURE AND BRIGHTNESS SENSOR The motion detector FRIENT lets you know if there is movement in your home and informs you of the temperature and brightness measured in real time.
FRIENT - ZIGBEE 3.0 MOTION DETECTOR + TEMPERATURE AND BRIGHTNESS SENSOR The motion detector FRIENT lets you know if there is movement in your home and informs you of the temperature and brightness measured in real time.
FRIENT - ZIGBEE 3.0 SMART TEMPERATURE AND HUMIDITY SENSOR The temperature and humidity sensor makes it possible to measure the temperature and humidity in its housing in real time.
FRIENT - ZIGBEE 3.0 SMART TEMPERATURE AND HUMIDITY SENSOR The temperature and humidity sensor makes it possible to measure the temperature and humidity in its housing in real time.
The NS-2 is a 2-wire Akuvox IP network switch that offers a convenient way to upgrade analog intercom systems, without having to redo the wiring. Its very long transmission distance and good compatibility with existing lines allow it to adapt to most old buildings.
This product is part of the 2-wire range ofAkuvox. It is ideal for renovation.
The NS-2 is a 2-wire Akuvox IP network switch that offers a convenient way to upgrade analog intercom systems, without having to redo the wiring. Its very long transmission distance and good compatibility with existing lines allow it to adapt to most old buildings.
This product is part of the 2-wire range ofAkuvox. It is ideal for renovation.
AI IR Mini Dome Network Camera
Smart & Superior IR Performance in the Dark
2MP · AI · 140dB WDR · 0.002Lux Ultra Low-light Smart IR II · 20m IR Distance · 60fps · PoE
AI Mini Series
AI IR Mini Dome Network Camera
Smart & Superior IR Performance in the Dark
2MP · AI · 140dB WDR · 0.002Lux Ultra Low-light Smart IR II · 20m IR Distance · 60fps · PoE
AI Mini Series
The LoRaWAN® ModBus Master RS485 sensor allows to collect data from ModBus devices. It transforms existing equipment into communicating objects via a public or private LoRaWAN® network. The sensor can modify the behavior of the ModBus equipment by writing in its registers.
The LoRaWAN® ModBus Master RS485 sensor allows to collect data from ModBus devices. It transforms existing equipment into communicating objects via a public or private LoRaWAN® network. The sensor can modify the behavior of the ModBus equipment by writing in its registers.
Rithum Switch now integrates with audio systems running BluOS, such as those manufactured by Bluesound, NAD and more.
This is the Pro version of the plugin. If you are an end customer, please contact us to be put in touch with a reseller.
Rithum Switch now integrates with audio systems running BluOS, such as those manufactured by Bluesound, NAD and more.
This is the Pro version of the plugin. If you are an end customer, please contact us to be put in touch with a reseller.
Heatit External Room Sensor is designed for use with Multireg and Heatit thermostats. The sensor can be mounted directly on a wall or on top of a standard European wall box. It can be used with most frames that are adapted to System 55. The product comes in a matt version.
Heatit External Room Sensor is designed for use with Multireg and Heatit thermostats. The sensor can be mounted directly on a wall or on top of a standard European wall box. It can be used with most frames that are adapted to System 55. The product comes in a matt version.
The benefits of using the Tybox 5300
Place the product freely: optimum temperature setting for comfort and savings
Simply change the reversible mode and temperature of the thermostat
Control and program with the app or voice assistant via the connected box
The benefits of using the Tybox 5300
Place the product freely: optimum temperature setting for comfort and savings
Simply change the reversible mode and temperature of the thermostat
Control and program with the app or voice assistant via the connected box
The Milesight A74 junction box is designed to contain the electrical connections of surveillance cameras, enabling them to be concealed and protected from tampering. It guarantees discreet, secure integratio
The Milesight A74 junction box is designed to contain the electrical connections of surveillance cameras, enabling them to be concealed and protected from tampering. It guarantees discreet, secure integratio
The MSR-2 is a millimetric presence sensor coupled with a UV, LUX, temperatur and pressure sensor. Based on ESPHome, it is designed for Home Assisant users.
The MSR-2 is a millimetric presence sensor coupled with a UV, LUX, temperatur and pressure sensor. Based on ESPHome, it is designed for Home Assisant users.
Compact, powerful UniFi Cloud Gateway and WiFi 6 access point that powers the UniFi network. Power an entire network or simply interconnect as an access point.
Compact, powerful UniFi Cloud Gateway and WiFi 6 access point that powers the UniFi network. Power an entire network or simply interconnect as an access point.
The RG-RAP2266 is a high-performance, dual-radio, ceiling-mounted Wi-Fi access point designed to cover a large or medium-sized indoor area. The access point operates with either IEEE 802.3at PoE power or a local 12 V/2 A power supply.
Wi-Fi 6 omnidirectional AP
Wi-Fi data rate up to 3000 Mbps
Frequency 2.4 and 5 GHz / 160MHz Channel width ...
The RG-RAP2266 is a high-performance, dual-radio, ceiling-mounted Wi-Fi access point designed to cover a large or medium-sized indoor area. The access point operates with either IEEE 802.3at PoE power or a local 12 V/2 A power supply.
Wi-Fi 6 omnidirectional AP
Wi-Fi data rate up to 3000 Mbps
Frequency 2.4 and 5 GHz / 160MHz Channel width ...
The 8-channel, 10A switch module is a versatile KNX smart device offering manual control, scheduling, and real-time monitoring for enhanced energy efficiency and flexibility in smart home systems.
The 8-channel, 10A switch module is a versatile KNX smart device offering manual control, scheduling, and real-time monitoring for enhanced energy efficiency and flexibility in smart home systems.
The Aqara Touchscreen Dial V1 EU is a touchscreen rotary switch for controlling Aqara devices and adjusting temperature, humidity and light. It integrates easily with third-party ecosystems via Wi-Fi.
Multi-device/scene control
2 relay outputs
Flexible control
Temperature and humidity detection
Custom screen
Elegant and...
The Aqara Touchscreen Dial V1 EU is a touchscreen rotary switch for controlling Aqara devices and adjusting temperature, humidity and light. It integrates easily with third-party ecosystems via Wi-Fi.
Multi-device/scene control
2 relay outputs
Flexible control
Temperature and humidity detection
Custom screen
Elegant and...
The Ultimate Plant Sensor Apollo PLT-1 is an advanced tool designed for home automation and gardening enthusiasts. It enables detailed monitoring of indoor plant environmental conditions. Thanks to its integration with Home Assistant via ESPHome, this sensor facilitates the automation of plant care.
USB-C powered version (not included)
The Ultimate Plant Sensor Apollo PLT-1 is an advanced tool designed for home automation and gardening enthusiasts. It enables detailed monitoring of indoor plant environmental conditions. Thanks to its integration with Home Assistant via ESPHome, this sensor facilitates the automation of plant care.
USB-C powered version (not included)
SLZB-MR3 is a Zigbee and Matter Over Thread dongle via Ethernet POE with 2 chipsets CC2674P10 + EFR32MG24 compatible with Zigbee2Mqtt and Home Assistant.
SLZB-MR3 is a Zigbee and Matter Over Thread dongle via Ethernet POE with 2 chipsets CC2674P10 + EFR32MG24 compatible with Zigbee2Mqtt and Home Assistant.
The SMLIGHT SLWF-09 is a modular and powerful LED controller, compatible with WLED, Ethernet, PoE, and microphone, ideal for creating custom addressable lighting installations that are music-responsive and can be integrated into advanced home automation systems.
The SMLIGHT SLWF-09 is a modular and powerful LED controller, compatible with WLED, Ethernet, PoE, and microphone, ideal for creating custom addressable lighting installations that are music-responsive and can be integrated into advanced home automation systems.
The mmWave LD2412 APOLLO AUTOMATION sensor offers precise motion and presence detection thanks to 60 GHz radar technology. Ideal for home automation, security and control, it combines low power consumption, high sensitivity and easy integration.
Designed to be used in conjunction with a compatible module, such as Apollo's R PRO-1.
The mmWave LD2412 APOLLO AUTOMATION sensor offers precise motion and presence detection thanks to 60 GHz radar technology. Ideal for home automation, security and control, it combines low power consumption, high sensitivity and easy integration.
Designed to be used in conjunction with a compatible module, such as Apollo's R PRO-1.
Compatible with all types of lighting (LED, compact fluorescent, halogen, etc.)
Ideal for adding an additional control to lighting
Allows the use of the same model of switch that already exists
Allows the establishment of a time program and the remote control of lighting if it is connected to TYDOM
Compatible with all types of lighting (LED, compact fluorescent, halogen, etc.)
Ideal for adding an additional control to lighting
Allows the use of the same model of switch that already exists
Allows the establishment of a time program and the remote control of lighting if it is connected to TYDOM