No more keys, use your smartphone to lock and unlock your door! Z-Wave and Bluetooth model.

The uniquely designed PSR04 Smart Color Button from Philip offers a range of features to control your home appliances

HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Z-Wave Touch Panel Switch, 3 channels. TPS03 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Three relay channels version

Applied to control water heating system like: wall mounted boiler, water valve/pump, under floor pipes, radiator systems, etc; and electrical system like: heating cable, electro-thermal film, heating actuator, electrical globe valve etc.

JEEDOM LUNA is the new entry-level standalone and multi-protocol home automation box integrating Jeedom software.

Heatit Z-Dim2 is a Z-Wave rotary dimmer that can control many types of lighting fixtures.

This pack includes 1 Home Assistant Voice Preview and 2 Home Assistant-compatible ESPHome Swiss plugs.

The Z-Wave Plus motion detector PSP05-D from Philio can be used both indoors and outdoors. It is supplied with a magnetic mount fitting for easy installation and also includes a lens cover to enable you to exclude an area from the motion detector if so wished.

This unique type of jet type water meter can be used to measure the volume of hot water (90°C max). It is fitted with a reed type bulb (ILST) pulse emitter.

The MH-DT411-EU switch from the manufacturer MCOHome enables you to switch the connected load either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

FIBARO Walli Switch is a smart switch designed for quick installation in flush-mounted boxes. It can control one or two loads separately and is equipped with an LED ring, real-time consumption monitoring and known and recognised features of Fibaro modules.

FIBARO Walli Outlet is a smart outlet that allows you to control and manage the electric appliance connected to it. It is equipped with an LED ring, which informs you about the energy use. It can control a maximum load of 3680W (16A).

The Remotec ZXT-120 is a Z-Wave to IR converter to control your air-conditioning.

The Aeotec Range Extender 7 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Warning: This is not a Swiss format socket.

Z-Wave Touch Panel Switch, 1 channels. TPS01 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. One relay channel version

The Water Sensor 7 Pro is a sensor designed to detect drops and leaks and help mitigate water damage.

One miniature sensor for 4 different measurements for your home.

Energio is the only device you need to monitor your building's energy consumption. Simply install, connect and commission it to collect all the information from the building's energy meters and make it available on the Smarthome SA solution cockpit.

Z-Uno Shield is a multifunctional DIN-rail smart home device based on Z-Uno. It implements most useful features of Z-Uno and requires no soldering and no programming.

PHILIO TECH PST02-1B Z-WAVE+ 3 in 1 detector: motion detector, temperature sensor and luminosity detector

Z-Uno 2 is an easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired...

This switch enables you to switch the two connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

FIBARO Walli Outlet is a smart outlet that allows you to control and manage the electric appliance connected to it. It is equipped with an LED ring, which informs you about the energy use. It can control a maximum load of 3680W (16A).

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 230 VAC powered version.

The RaZberry 7 Pro from Z-Wave.Me is a daughter board for the Raspberry Pi that turns it into a Z-Wave controller. Model with external antenna.

Controlled return HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control...

The Z-Wave to DALI controller is a Z-Wave device that is used to switch ON/OFF and adjust light intensity of DALI control gears on a DALI circuit and can be controlled by other Z-Wave devices.

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

The Z-Wave Plus motion detector PSP05-B from Philio can be used both indoors and outdoors. It is supplied with a square recessor.

Z-Wave Plus carbon monoxide detector with built-in battery and temperature gauge.

This switch enables you to control 4 connected loads, either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

Pack including the FIBARO Radiator Thermostat (Homekit) and the Bluetooth temperature sensor.

The Heiman gas sensor is designed to prevent the risks caused by a gas leak. If gas is detected, a sound alarm will be triggered and a Z-wave signal sent to the main control box.