FIBARO Wall Plug (Type F) is a HomeKit-compatible smart plug that uses a Wi-Fi® connection and wireless Bluetooth® Low Energy technology.  Warning: This plug is not Swiss format.   

The Heatit ZM Dimmer is a flush-mounted dimmer designed for installation in European wall-mounted electrical boxes.

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

With a futuristic design and compact size, this Fibaro flood sensor alerts you in case of flood or sharp increase or decrease in temperature.

Z-Wave Touch Panel Switch, 2 channels. TPS02 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Two relay channels version

Controlled return Z-Wave ON/OFF relay module Z-Wave+...

Compact electrothermal actuator for controlling waterbased heating systems. Can be regulated manually or on a signal from a thermostat or external regulator.

Lock or unlock your Danalock very easily thanks to the Danapad V3 keypad.

With the DanaBridge V3, open and close your Danalock V3 remotely.

The Z-Wave Plus motion detector PSP05-B from Philio can be used both indoors and outdoors. It is supplied with a square recessor.

The Amika touch screen allows the management of various devices and offers a wide range of functionalities depending on the devices installed for the comfort and security of your home, such as the control of your lighting, your controlled plugs and your blinds, or answering your intercom, viewing your energy consumption, etc.

FIBARO Walli Roller Shutter switch mechanism, delivered without finishing frame or knob, leaving you free to choose the Legrand Céliane or Schneider Odace finish.

Heating control kit Nice FGT-PACK - Z-Wave radiator valve and external sensor. Enhance your heating system with precise, room-specific control that saves energy and improves comfort. The Nice heating control kit combines an intelligent Z-Wave thermostatic valve with an external temperature sensor for precise, responsive...

The Home Center 3 Lite is the heart of your connected home. It is ideal for those who wish to embark on the world of home automation.

Install the modules directly nodon to the electrical panel with the Rail DIN V2 box! Set of 5 pieces.

The FIBARO Walli Controller is a smart wall-mounted Z-Wave switch that can activate scenes or control other Z-Wave devices via associations.

Nice Heat-Control FGT-001 - Z-Wave thermostatic radiator valve. Nice Heat-Control FGT-001 offers precise, application-compatible heating control in every room via Z-Wave. Intelligent programs and a room analysis algorithm help you quickly reach the desired temperature while saving energy.

The WallMote Quad from Aeotec is a smart, portable, wall-mounted Z-wave controller.

Fibaro Smart Implant de Fibaro improves your equipment and makes it intelligent.

FIBARO Walli Switch is a smart switch designed for quick installation in flush-mounted boxes. It can control one or two loads separately and is equipped with an LED ring, real-time consumption monitoring and known and recognised features of Fibaro modules.

HELTUN Fan Coil Thermostat is a Z-Wave Plus v2 (700 serie) enabled device for indoor temperature control mainly applied to control chiller and fan coil 2-pipe or 4-pipe systems. Attention: choose the color from the drop-down list below.

Heatit Z-TRM6 DC is an electronic thermostat with potential-free relay, designed for controlling boilers, heat pumps, and actuators. The thermostat can be controlled via your Z-Wave network or through the buttons on the front panel. User-friendly interface. <span...

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

FIBARO Home Center 3 is one of the most advanced home automation controllers in the world. It offers *multi-protocol compatibility and incredible processing power.

Aeotec's MultiSensor 7 is a multi-function sensor that detects temperature, humidity, motion, light, UV and vibration.

Thermofloor - Z-wave+ Hydronic controller for 10 outlets Heatit Z-Water 2

The recess adaptor enables the MultiSensor 6 to be fitted into a ceiling or a wall.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

FIBARO Walli Switch is a smart switch designed for quick installation in flush-mounted boxes. It can control one or two loads separately and is equipped with an LED ring, real-time consumption monitoring and known and recognised features of Fibaro modules.

No more keys, use your smartphone to lock and unlock your door! Homekit model.

Refill UR Fog 750 ml for Modular 400 and Modular 500

The Heatit Z-Push wall controller is a Z-Wave switch for wall mounting. It comes with three fronts, so you can choose between 1, 2 or 3 buttons. Color to choose below:

The MH10-PM air quality monitor from MCOHome will help you maintain good air quality in your room.

The Philio PAT02-1B wireless sensor communicates uses Z-Wave technology to transmit temperature and humidity data.

The Fibaro Wall Plug is a smart and extremely compact plug module, which allows you to control lighting or any other device. Attention: This plug is not in Swiss format. It is designed for use abroad. It can be used in Switzerland in a...

Pack including the FIBARO Radiator Thermostat (Z-wave+) and the Bluetooth temperature sensor.