Heatit ZM Thermostat is a recessed thermostat module for electric floor heating. The thermostat allows you to control your heating via your Z-Wave network.

With soft lines, a polished surface and small size, this smoke detector enables you to be alerted in the event of a fire.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

With a futuristic design and compact size, this Fibaro flood sensor alerts you in case of flood or sharp increase or decrease in temperature.

The Heatit ZM Dimmer is a flush-mounted dimmer designed for installation in European wall-mounted electrical boxes.

RGB/RGBW Controller (Red, Green, Blue, White) Z-wave compatible with analog input sensors (FIBARO RGBW Controller 2).

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

The FGDW-002 from Fibaro is a Z-wave PLUS window/door opening sensor fitted with a temperator sensor.This new version is more compact than the previous one.

FIBARO Wall Plug (Type F) is a HomeKit-compatible smart plug that uses a Wi-Fi® connection and wireless Bluetooth® Low Energy technology.  Warning: This plug is not Swiss format.   

Fibaro Smart Implant de Fibaro improves your equipment and makes it intelligent.

Z-Wave ON/OFF relay module Z-Wave+ with built-in energy meter - 1x2300W

Pack including the FIBARO Radiator Thermostat (Z-wave+) and the Bluetooth temperature sensor.

Z-Wave Touch Panel Switch, 2 channels. TPS02 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Two relay channels version

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

The FIBARO Radiator Thermostat is an intelligent thermostatic head that controls the temperature in your room, using a built-in or external sensor and regulating the heat level according to your individual preferences.

With the DanaBridge V3, open and close your Danalock V3 remotely.

The Heatit Z-DIN 616 is a DIN module equipped with 6 potential-free relay outputs and 6 digital inputs.

The Z-Wave Plus motion detector PSP05-B from Philio can be used both indoors and outdoors. It is supplied with a square recessor.

The Heltun HT-01 Thermostat is a programmable room thermostat with an LCD screen, four touch buttons and several sensors (temperature, humidity, brightness) for optimal control of your heating. It is recommended to control electric heaters, boilers, heating mats or underfloor heating. Its 16A relay allows it to switch large loads. Attention: choose the color from the...

Controlled return Z-Wave ON/OFF relay module Z-Wave+...

Thermofloor - Z-wave+ Hydronic controller for 10 outlets Heatit Z-Water 2

Z-Wave Plus carbon monoxide detector with built-in battery and temperature gauge.

The Zooz ZSE70 outdoor motion sensor can be used with a compatible hub to automate lights, sirens, or even sprinklers to scare off an intruder.

FIBARO Walli Switch is a smart switch designed for quick installation in flush-mounted boxes. It can control one or two loads separately and is equipped with an LED ring, real-time consumption monitoring and known and recognised features of Fibaro modules.

The uniquely designed PSR04 Smart Color Button from Philip offers a range of features to control your home appliances

Aeotec TriSensor 8 was developed to detect ambient values and movement and to transmit them with Z-Wave Plus.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

This unique type of jet type water meter can be used to measure the volume of cold water (30°C max). It is fitted with a reed type bulb (ILST) pulse emitter.

The RaZberry 7 Pro from Z-Wave.Me is a daughter board for the Raspberry Pi that turns it into a Z-Wave controller. Model with external antenna.

The MH10-PM air quality monitor from MCOHome will help you maintain good air quality in your room.

PHILIO TECH PST02-1B Z-WAVE+ 3 in 1 detector: motion detector, temperature sensor and luminosity detector