MCO Home - Touch Panel Z-Wave 2 Buttons, White (MH-S412)
This switch enables you to switch the two connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol.
Presentation
The MH-S411-EU switch from the manufacturer MCOHome enables you to switch the 2 connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol. Its glass finish and elegant design will add a stylish modern touch to your home.
It can be included in a Z-Wave network and then controlled via your Z-Wave box or your remote control. The switch can control any type of load, either lighting or electrical equipment.
The MH-S411-EU switch can be used to control directly associated devices (Group 1). You can therefore combine up to 5 other devices and control them manually via the switch or your Z-Wave controller.
The switch is also fitted with a LED that indicates its switching status.
Each Z-Wave module functions as a wireless repeater with the other modules to ensure that your home is fully covered.
Note: this switch requires a neutral.
Features
- Remote control for 2 lightings or other appliances
- To be installed to replace an existing switch
- ON/OFF function
- Supports association controls (Group 1 and Group 2)
- Local load control
- Status LED
- Glass finish, modern design
- Touch button
Technical Specifications
- Type of module: Z-Wave receiver
- Colour: White
- Power supply: 230 V, 50 Hz
- Wiring: 3-wire, neutral required
- Maximum power: 5A (1100W)
- Frequency: 868.42 MHz
- Range: up to 30m
- Dimensions: 86 x 86 x 43 mm
- Display: Blue LED
Specifications
| Protocol | Z-Wave Serie 500 |
|---|---|
| Type | Module Switch |
| Function | Actuator |
| Gateway compatibility | Fibaro Home Center - total compatibility Homey - total compatibility eedomus+ - total compatibility |
| Use | Fixture Control Lighting Control Switches and Remote Control |
Guides
MH--S412-EU UM_en
Reviews (4) - Review moderation
Il colore dei LED non è blu (sto aspettando dal supporto se è possibile cambiare colore e mettere il bel blu pubblicizzato). Si sente un leggero "Clic" del relé quando si preme il pulsante.
Le produit fonctionne bien, est facile à installer dans une boîte existante CH standard. Ce serait mieux si la plaque de fixation était aux normes, mais ce n'est pas dramatique. en revanche, je ne trouve pas de fichier de configuration pour une intégration simple dans une installation Jeedom.
Le client n'a pas laissé de commentaire.
livraison super rapide à recommander
-
Accessories
-
Frequently purchased together
-
Trending products
CHF39.90
