FIBARO - Double Relay Switch Z-Wave+ FGS-224 (FIBARO Double Smart Module)
The FGS-224 micro-module switch lets you control two lamps or two devices from a distance.
Fibaro ON/OFF Micro-module Switch Double
The FGS-224 micro-module switch lets you control two lamps or two devices from a distance, thanks to the Z-Wave system, while letting you keep the switches you already have.
This means you can activate connected loads using the switches you already have, using the Z-wave transmitter, or using the button right on the micro-module.
This module has two free potential relays (dry contact) with a common entry point, so that it can be used either for normal voltage of 230V, or any type of continuous charge (5V, 12V, even 24V DC).
This can also be used to guide any type of load, such as heating (by connecting the dry contact to a thermostat) or motorizing doors, for example garage doors, etc.
The Fibaro FGS-224 micro-module is an upgraded version of the FGS-222.
Every Z-wave module functions as a wireless repeater with other modules, in order to ensure the complete coverage of your home.
Warning: This module needs a neutral wire to function.
Features
- Control two lamps/devices from a distance
- Z-Wave PLUS
- Security S0 and S2
- Can be installed behind the switches you already have
- Two free potential relays
- ON/OFF function
- Screw terminals are larger to make cabling more easy
- Round shape to meet stricter regulations
- Can be used back and forth
- Can be used instead of a remote control
- Small, discreet, and aesthetically pleasing
- Ease of use and installation
Technical Specifications
- Module type: Z-wave receiver
- Voltage: 110 – 240V ~ 50/60Hz
- Input: 0.8W
- Cables: 3 wires, neutral required
- Maximum output: 6.5A/110-240V~ 50/60Hz
- Total Maximum current: 10A/ 110-240V~50/60Hz
- Frequency: 868.42 Mhz
- Transmission Distance: 50m in an open field, 30m inside
- Power of signal: 1mW
- Dimensions: 15 x 42 x 38 mm
- Temperature when functioning: 0-35°C
- Maximum Temperature: 105°C
Specifications
| Use | Blinds/Gate Control Fixture Control Lighting Control |
|---|---|
| Type | Module |
| Function | Actuator Dry Contact |
| Gateway compatibility | Fibaro Home Center - total compatibility eedomus+ - total compatibility |
| Protocol | Z-Wave Serie 500 |
Reviews (18) - Review moderation
produit top, facile à installer et à programmer
Included with S2 security in Home Assistant via my Z-Wave-js ui app with an Aeotec - Z-Wave+ Z-Stick ZW090C+ USB Controller (on a PI4). I prefer this model over the FGS-223 because it has the S2 security, even if you need to put the "jumper" for a classic 230V setup (from L to IN pin), but security come first!
Un service de qualité, un excellent conseil, c'est pourquoi je commande toujours Fibaro chez Swiss Domotique. Le produit correspond parfaitement au besoin
S'installe exactement comme les autres modules Fibaro avec l'avantage de la fonctionnalité de 2 modules dans le volume d'un seul. Attention à bien réfléchir à un point tout de même: une prise électrique est faite pour délivre 10A et le relais du module n'en gère que 6. Donc à ne pas monter sur des prises ayant vocation à passer de fortes intensités ou alors en y ajoutant un relais extérieur, capable lui de gérer les 10A d'une prise standard.
Il prodotto è ottimo
Der Kunde hat keinen Kommentar hinterlassen.
Ich verwende diesen Schalter immer wieder. Er bietet viele Einstellmöglichkeiten, läuft aber auch in der Standarteinstellung bereits, nur "Schalter" oder "Taster" definieren. Was Fibaro noch verbessern könnte wäre hier Steck statt Schraubklemmen zu verbauen. Daher nur 4 Sterne.
Le produit correspond a mes attentes avec une livraison rapide
-
Accessories
-
Frequently purchased together
-
Trending products
CHF39.90
