MDT - Dual analog input/output, recessed, input voltage 0-10V/2-10V or current loop 0-20mA/4-20mA output voltage
The Analog In-/Output MDT is suitable for controlling devices with 0-10V inputs and for retrieving 0-20mA/0-10V measurement data. All channels are galvanically isolated from the KNX bus and can be configured independently of each other as input or output.
description
The Analog In-/Output MDT is suitable for controlling devices with 0-10V inputs and for retrieving 0-20mA/0-10V measurement data. All channels are galvanically isolated from the KNX bus and can be configured independently of each other as input or output.
The input voltage range is 0-10V or 2-10V, optional inputs can be used as a current loop with 0-20mA or 4-20mA. Each input can be set individually with the ETS. The min/max, threshold and traffic light functions are available, the conversation of the unit of measurement and the DPT can be configured.
function
- Each channel can be configured independently (input/output).
- The inputs/outputs are galvanically isolated from the bus.
- The inputs/outputs are galvanically connected to each other.
- The voltage for output operation is generated inside the actuator.
- No external power supply is needed
- Operation of input 0-10V/2-10V or 0-20mA/4-20mA (switchable)
- Conversation of the unit of measure and the configurable DPT
- Min/Max function, wire break detection
- Threshold and traffic light function
- 0-10V output functions:
- Control by 1Byte, 2Byte float, or 1Bit objects
- Day/night function to limit the control value
- Emergency mode in case of failure of the given value
- Recessed mounting in an installation box
- Dimensions (L x H x D): 41mm x 41mm x 12mm
- Fast app download (long frame support for ETS5)
- Integrated bus coupling unit
- 3-year warranty
Technical specifications
- Number of channels 2
- Input voltage 0-10V 2-10V
- Internal resistance 130kΩ
- Current loop range 0-20mA 4-20mA
- Resistance 266Ω
- Output voltage 0-10V
- Output current max. 2mA
- Load resistor min 5kΩ
- KNX TP-256 interface specification
- Application software available ETS 4/5
- KNX bus connection terminal 0.8mm Ø, solid core
- Knx bus power supply
- Power consumption of the KNX typ bus. <0.3W
- Operating temperature 0 bis + 40°C
- IP Enclosure 20
- UP dimensions (L x H x D) 41mm x 41mm x 12mm
Specifications
| Type | Accessories for Smarthome gateways Gateways/Antennas Module |
|---|---|
| Protocol | IP KNX |
-
Accessories
-
Frequently purchased together
-
Trending products
CHF39.90
