Temperature probes

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

AIR-1 is a 10-in-1 Home Assistant-compatible air quality sensor. It measures the following data in particular: Temperature Humidity PM1 (fine particles) PM2.5 (fine particles) PM4 (fine particles) PM10 (fine particles) VOC (volatile organic compounds) NOx (nitrogen oxides) CO2 (carbon...

Apollo TEMP-1B stand-alone connected temperature sensor - Monitoring without electrical stress Intelligent wireless sensor with 6-month battery life. On-board temperature/humidity + optional external waterproof/food sensors (not included ). Native Home Assistant integration, LED/buzzer alerts. Perfect for basements, vehicles, isolated areas. ...

With a futuristic design and compact size, this Fibaro flood sensor alerts you in case of flood or sharp increase or decrease in temperature.

The FIBARO Motion Sensor is a Bluetooth Low Energy multisensor compatible with the Apple HomeKit protocol. It not only detects movements but also measures ambient temperature and light intensity. It includes a built-in accelerometer that will detect any attempt to tamper with the device.

Z-Wave Touch Panel Switch, 2 channels. TPS02 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Two relay channels version

Controlled return Z-Wave ON/OFF relay module Z-Wave+...

Apollo Automation's MTR-1 is an advanced multi-target radar sensor designed for seamless integration with ESPHome and Home Assistant. Compact and versatile, it offers a wide range of features to optimize your home automation.   Version without Co2 sensor

Apollo TEMP-1 connected temperature sensor - High-performance continuous monitoring Intelligent USB-C sensor for continuous temperature/humidity monitoring. Optional external waterproof/food sensors (not included ), native Home Assistant integration, LED/buzzer alerts. Ideal for fixed installations requiring continuous monitoring without battery...

Measure the temperature and humidity of an area in your home. Compatible with the Fibaro Smart Implant.

Plastic cover set for Heatit thermostats. Suitable for all the brand's Z-Wave thermostats (Heatit, Z-TRM2fx, etc.).

Wireless fire detector with heat and smoke sensors Official Aqara Importer

The MSR-2 CO2 is a millimetric presence sensor coupled with a CO2, UV, LUX, temperature, humidity and pressure sensor. Based on ESPHome, it is designed for Home Assisant users.

The MSR-2 is a millimetric presence sensor coupled with a UV, LUX, temperatur and pressure sensor. Based on ESPHome, it is designed for Home Assisant users.

The 960mA Power Module is a premium add-on for EIB/KNX systems, providing stable power supply and signal transmission with easy installation and wide voltage range support. As an official Akuvox supplier , we have the possibility to offer a 5-year warranty on this product. Choose the 2-year or 5-year warranty below.

The Ultimate Plant Sensor Apollo PLT-1 is an advanced tool designed for home automation and gardening enthusiasts. It enables detailed monitoring of indoor plant environmental conditions. Thanks to its integration with Home Assistant via ESPHome, this sensor facilitates the automation of plant care. USB-C powered version (not included)

FRIENT - ZIGBEE AIR QUALITY SENSOR The air quality sensor allows FRIENT to monitor VOC, humidity and temperature levels remotely and in real time.

The AM319 is a compact indoor environment monitoring sensor that measures temperature, humidity, light, CO2 concentration, HCHO/O3 level, TVOC, barometric pressure, PM2.5, PM10 and movement.

The outdoor temperature sensor is designed to measure the temperature outside buildings and inside refrigeration units. The data is then transmitted via a public or private LoRaWAN® radio network.

Heating control kit Nice FGT-PACK - Z-Wave radiator valve and external sensor. Enhance your heating system with precise, room-specific control that saves energy and improves comfort. The Nice heating control kit combines an intelligent Z-Wave thermostatic valve with an external temperature sensor for precise, responsive...

This temperature sensor for the floor can be used with the Z-Wave Heatit Thermostat.

This revolutionary wall switch lets you switch the 4 connected loads, either manually like a conventional switch, or remotely via WiFi. It is equipped with an incredible quantity of functions and innovations while remaining easy to use.

Nice Heat-Control FGT-001 - Z-Wave thermostatic radiator valve. Nice Heat-Control FGT-001 offers precise, application-compatible heating control in every room via Z-Wave. Intelligent programs and a room analysis algorithm help you quickly reach the desired temperature while saving energy.

The FIBARO Radiator Thermostat Temperature Sensor (FGBRS-001) is a cordless temperature sensor which can be used with the FIBARO Radiator Thermostat thermostatic head to allow a better temperature control.

HELTUN Fan Coil Thermostat is a Z-Wave Plus v2 (700 serie) enabled device for indoor temperature control mainly applied to control chiller and fan coil 2-pipe or 4-pipe systems. Attention: choose the color from the drop-down list below.

The ultra-thin air quality sensor eurotronic provides comprehensive information on the room's air quality (temperature, humidity, VOC (ppm) and CO2*).   *The CO2 value is estimated from the VOC measurement

Heatit Z-TRM6 DC is an electronic thermostat with potential-free relay, designed for controlling boilers, heat pumps, and actuators. The thermostat can be controlled via your Z-Wave network or through the buttons on the front panel. User-friendly interface. <span...

Heatit WiFi6 is an electronic thermostat designed for electric heating. The thermostat can be controlled via the “MyHeatit” app using Wi-Fi, Bluetooth (BLE) or the buttons on the front of the thermostat. The thermostat features a user-friendly interface.

The HyPanel Ultra features a 10-inch touchscreen that excels in display quality, with a high screen-to-body ratio, 350 nits brightness, 2.0K resolution and optimal aspect ratio for superior display quality. As an official Akuvox supplier , we are able to offer a 5-year warranty on this product. Choose the 2-year or 5-year warranty...

This wired wall sensor allows for the accurate control of relative humidity, temperature, and light. White model.

FRIENT - ZIGBEE 3.0 MOTION DETECTOR + TEMPERATURE AND BRIGHTNESS SENSOR The motion detector FRIENT lets you know if there is movement in your home and informs you of the temperature and brightness measured in real time.

Aeotec's MultiSensor 7 is a multi-function sensor that detects temperature, humidity, motion, light, UV and vibration.

The akubela HyPanel is a multifunctional control panel with Android 10 operating system. The ALL IN ONE design integrates an intelligent intercom, KNX compatibility, a ZigBee gateway and much more. Key features 4” touchscreen Android 10 operating system WiFi, Bluetooth and RJ45 KNX compatible ...

HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Milesight AM307 is a compact device with a sleek modern design, packed with sensors (CO2, temperature, humidity, TVOC, and more).