OMNIO - Switching actuator 1-channel UPS230/08

Presentation

The Omnio flush mounted multi switching actuator 1-channel UPS230/08 is a device for switching electrical loads.

Its potential free output is able to be controlled by up to 50 Omnio radio transmitters. Each transmitter can be programmed with one of over twenty different functions, for example switch on, switch off, staircase light, sequential push-button, step-switch (AW20), timer (AW23/24/25), window and sliding door surveillance, programmable scenes and presence simulation. Bidirectional communication, EEP D2-01-01. ARCO ready (AWAG Remote Commissioning).

In addition, this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.

Functions 

• Switch On and Off 
• Staircase light function 
• Sequential push-button 
• Step switch (AW20) 
• Timer (AW23/24/25) 
• Window and sliding door surveillance 
• Programmable scenes 
• Presence simulation
• Repeater function 
• EnOcean Equipment Profile (EEP) D2-01-01 
• ARCO ready (AWAG Remote Commissioning)
   

technical specifications

• Voltage supply : 110-240 V~ 50/60 Hz
• Standby power consumption : 0.6 W
• Hardware protection (automatic circuit breaker / fuse) : 13 A
• Power output
• Switch contact : 1 isolated change-over contact
• Rated current : 16 A / 240 V~
• Inductive load (cosφ = 0.6) :  10 A / 240 V~
• Incandescent lamp : 10 A / 240 V~
• Fluorescent lamp (cosφ = 0.9, C = 140 µF) : 10 AX / 240 V~
• Screw terminals : 4 mm²
• Protection class : IP20
• Overvoltage protection : ✓
• Permanently shortcircuit proof (control unit) : ✓
• Technology : EnOcean 868 MHz
• Radio module : EnOcean TCM320  bidirectional
• EnOcean Equipment Profile (EEP) : D2-01-01
• Environment : -20 … +40 °C / 5 ... 90 % rH non condensing
• Housing : Lexan, ø 51 x 25 mm
• Weight : 45 g
• EC-Directives : 2006/95/EC, 2004/108/EC
• Standards : EN 60669-1/-2-1/-2-2, EN 61000-3-2/-3-3, EN 62493