The benefits of using the Tybox 5300 Place the product freely: optimum temperature setting for comfort and savings Simply change the reversible mode and temperature of the thermostat Control and program with the app or voice assistant via the connected box

The MH10-PM air quality monitor from MCOHome will help you maintain good air quality in your room.

Pack including the FIBARO Radiator Thermostat (Z-wave+) and the Bluetooth temperature sensor.

Wireless accessory for electric heating (with a pilot wire) This accessory is ideal thanks to its wireless technology (no work) Remotely control your electric convectors Check the status of your heating remotely or through the control screen

HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Applied to control water heating system like: wall mounted boiler, water valve/pump, under floor pipes, radiator systems, etc; and electrical system like: heating cable, electro-thermal film, heating actuator, electrical globe valve etc.

Outside temperature sensor N/A

Radio receivers for electric convectors on power control Scalable solution with Delta Dore connected ecosystem (via TYDOM)

Wireless gateway to transform a Delta 8000 BT (Technical Housing) heating system into a wireless system Easy control and programming of heating on thermostats 10-year battery life for battery-powered products Scalable solution with Tydom connected ecosystem and connected home app

Technical unit for Delta 8000 system. Intuitive control and programming of heating with the thermostat Tydom and Lifedomus compatible

This wall sensor for Heatit thermostate accurately measures the air temperature. It has a sophisticated and elegant design.

Easy and simple control and programming of heating on thermostats 10-year battery life Scalable solution with the connected ecosystem Delta Dore via Tydom and its free "connected home" application

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 230 VAC powered version.

Wireless accessory for underfloor heating management Install this accessory easily thanks to wireless technology (less work)

Wireless programmable thermostat for hot water heating (batteries) Easily use this thermostat with its dial and backlit screen Program your heating simply using pre-programs and customizable Promote savings while keeping control of your comfort thanks to anticipation Control your heating system remotely from the app or a voice assistant thanks to the...

Wired thermostat Simply use this thermostat thanks to its 3 buttons Control and program the thermostat remotely on your smartphone or tablet thanks to the Tydom range

Controlled return HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control...

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

Introducing the new Smart Thermostat - Starter Kit (v3): More comfort, better control and platform connectivity. Incl. Extenion Kit

Pack including the FIBARO Radiator Thermostat (Homekit) and the Bluetooth temperature sensor.

This temperature sensor for the floor can be used with the Z-Wave Heatit Thermostat.

Reading and navigation assisted with backlit screen in 2 colours Fast access to different modes (Party, etc.)

Customisable programming for enhanced comfort on a daily basis Up to 25% savings on your heating bill Easy to use with its central selector

Dedicated to pilot wire electric radiators, the ENOCEAN SIN-2-FP-01 Module makes it possible to make them connected and to automate the management of heating to achieve energy savings.

CPL phase coupler for three-phase installation This accessory allows you to use a heating programmer called CPL on a three-phase electrical installation

Controlled return Wireless Z-Wave actuator to switch loads of 3 A / 230 V. It is used to control hot water boilers or magnetic valves.

Vicki from MClimate is a smart thermostatic head that allows you to remotely control every heating unit in a building.

Room thermostat for electric radiators Intuitive control of the heating on the thermostat Battery life of the thermostat of 10 years Scalable solution with the connected ecosystem Delta Dore via TYDOM and its connected home application

The benefits of using the Tybox 2300 Place the product freely: optimum temperature setting for comfort and savings Simply change on/off mode and thermostat temperature Control and program with the app or voice assistant via the connected box

Radio pack for electric pilot wire heating including 3 RF 6600 FP receivers + 1 Tydom Home smart home box

Qubino wired built-in opening sensor

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

Introducing the new Smart Thermostat - Starter Kit (v3+): More comfort, better control and platform connectivity.

Introducing the new Smart Thermostat (v3): More comfort, better control and platform connectivity. If you own a Smart Thermostat - Starter Kit or a Smart Radiator Thermostat - Starter Kit of any version (V2/V3/V3+) then you can supplement these with additional Smart Thermostats to independently control multiple zones.