The ENOCEAN 1-channel modular mixed remote switch receiver with timer is used to switch various 230V load electrical devices from an ENOCEAN radio transmitter or sensor without batteries and wires or wired push button

The 1-channel 16A modular receiver receives and processes radio signals from transmitters or sensors within its range to switch large electrical loads.

Energy consumption monitoring and management RT2 Eco-devices. One single product to supervise everything.

The Omnio flush mounted multi switching actuator 1-channel UPS230/10 is a device for switching electrical loads. Its potential free output is able to be controlled by up to 50 Omnio radio transmitters.

The Omnio DIN rail mounted multi blind actuator 4-channels REGJ12/04 is a device to control 230 V~ tubular motors of blinds, sun blinds, awnings, sliding gates or garage doors

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio flush mounted push-button interface 2-channels TST230/10 a binary input device to integrate wired push-buttons, switches and sensors into the Omnio radio system. In addition this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.

The Omnio DIN rail mounted multi switching actuator 4-channels REGS12/04 is a device for switching electrical loads. Its four potential free outputs are able to be actuated from up to 50 Omnio radio transmitters

The Omnio flush mounted multi switching actuator 1-channel UPS230/08 is a device for switching electrical loads..

The RF Pulse allows the transmission, via Enocean technology, of the indexes of 2 pulse meters as well as various information from the electricity meter thanks to customer remote information. (historical and standard mode).

the SecuSignal window handle fromHoppe is a battery-free, maintenance-free EnOcean radio transmitter that monitors the status of a window or door. Toulon - 0737/EN-409 Aluminum HOPPE window handle with transmitter SecuSignal®, Secustik® and VarioFit® for window with tilt-opening

The mixed remote switch receiver is used to switch various electrical devices from wired pushbuttons or from EnOcean wireless switches.

The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus.

2-channel shutter management actuator with two inputs for conventional shutter push buttons, two electronic outputs 230 V~ / 2 A, power supply voltage 230 V

The occupancy sensor detects the presence of (movement) of people.

The X-Eno extension cord lets you add wireless, battery-less EnOcean technology to your IPX800 v4.

Remote antenna for 868MHz signal amplification. Can be used in an EnOcean system to improve signal range.

Standalone EnOcean temperature sensor (wireless, no battery needed) able to collect reliable precise information within a -30°C to +50°C range.

This EnOcean sensor is compatible with the EnOcean Smart Home & Smart Building protocol and can automatically detect any movement.

The 4-channel WS-CH-102 wall- Omnio mounted transmitter with battery-free and maintenance-free, with toggle key and series of toggle keys with central position, is matched to the Feller EDIZIOdue, ABB Sidus and Hager kallysto.line switch ranges

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 1-channel wet WS-NASS-103-RW is a battery-less and maintenance-free transmitter including a push-button fitted in a cover of the switch and socket line “robusto” of the company Hager AG. A variety of different printed inlays (blank, doorbell symbol, light symbol) come with the delivery.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The CO2-sensor is a wired radio sensor to capture the concentration of carbon dioxide (400…2550 ppm) in the air. The measured values are transmitted wireless to Omnio gateways. It is particularly used to control the air quality indoors in offices, schools, hotels and residential premises. EnOcean Equipment Profile (EEP) A5-09-04.

The water sensor H20-ECO is aThe water sensor H20-ECO is a battery less, maintenance-free and wireless sensor to detect water. The water sensor H20-ECO is a battery less, maintenance-free and wireless sensor to detect water. A swelling device is attached on the lower side of the sensor

The Omnio ceiling mounted occupancy sensor EOSWA-W-WAND SOLARPIR is a battery-less and maintenance-free PIR motion sensor with both wide angle and long-range options for maximum efficiency and flexibility in different room settings. Two molded buttons with LED indicator lights can be used to link and configure the device.

This small three-phase energy meter will easily fit into your electrical box. Connected to an IPX800 or to an eco-device, it will allow you to follow the consumption of a circuit or a three-phase installation with precision.

The 4-channel modular receiver receives and processes radio signals from transmitters or sensors within its range to switch LED and compact fluorescent lighting loads.