The MDT Time switch with 20 channels (6 cycle times each channel) has a daily/weekly/astro switching function and an adequate power reserve if the bus voltage fails. The cycle times of the single channels are adjustable by the ETS or can be set directly at the device. The large LCD display for comfortable handling allows direct switching of the 20 channels (Manual Mode). 

The MDT variation actuator receives KNX/EIB telegrams and varies up to 4 independent electrical charges. Each output can be manually controlled by a push button.

The push button MDT Glass releases KNX telegrams after touching the sensor areas on top, the operation to 1 or 2 buttons can be set.

The automatic motion sensor/switch MDT with light sensor captures the smallest movements thanks to its built-in pyrotechnic detectors and high-resolution lens. It is possible to configure 2 separate light channels, an HVA channel and a channel for room monitoring. The brightness of the...

The MDT variation actuator receives KNX/EIB telegrams and varies up to 4 independent electrical charges. Each output can be manually controlled by a push button.

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electric charges. Each output uses a relay (AKK-01UP.03: bistable relay, AKK-02UP.03: monostable relay). The outputs are parameterized individually via ETS. The device offers extensive functions such as...

Depending on its setting, the glass push button II Lite MDT issues KNX telegrams. Sensor areas can be programmed for 1- or 2-button operation (BE-GTL4xx.01: 4 single-sensor buttons). RGBW state LEDs can be controlled by internal or external objects. The brightness of the LEDs can be controlled via a day/night object or a brightness object. Besides switching, dimming, blinds, scenes, or...

Depending on its setting, the glass push button II Lite MDT issues KNX telegrams. Sensor areas can be programmed for 1- or 2-button operation (BE-GTL4xx.01: 4 single-sensor buttons). RGBW state LEDs can be controlled by internal or external objects. The brightness of the LEDs can be controlled via a day/night object or a brightness object. Besides switching, dimming, blinds, scenes, or...