Heatit Z-TRM6 DC is an electronic thermostat with potential-free relay, designed for controlling boilers, heat pumps, and actuators. The thermostat can be controlled via your Z-Wave network or through the buttons on the front panel. User-friendly interface. <span...

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Fibaro Smart Implant de Fibaro improves your equipment and makes it intelligent.

Z-Wave Touch Panel Switch, 2 channels. TPS02 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Two relay channels version

Install the modules directly nodon to the electrical panel with the Rail DIN V2 box! Set of 5 pieces.

The Heatit Z-DIN 616 is a DIN module equipped with 6 potential-free relay outputs and 6 digital inputs.

Controlled return Z-Wave ON/OFF relay module Z-Wave+...

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

Lock or unlock your Danalock very easily thanks to the Danapad V3 keypad.

With the DanaBridge V3, open and close your Danalock V3 remotely.

The Z-Wave Plus motion detector PSP05-B from Philio can be used both indoors and outdoors. It is supplied with a square recessor.

The Home Center 3 Lite is the heart of your connected home. It is ideal for those who wish to embark on the world of home automation.

The ultra-thin air quality sensor eurotronic provides comprehensive information on the room's air quality (temperature, humidity, VOC (ppm) and CO2*). &nbsp; *The CO2 value is estimated from the VOC measurement

Yubii Home is the heart of your new smart home, a home automation box that takes care of the comfort and safety of your whole family.

The Heatit Z-Push wall controller is a Z-Wave switch for wall mounting. It comes with three fronts, so you can choose between 1, 2 or 3 buttons. Color to choose below:

Homey Pro + Bridge package

The FGD-212 dimmer micromodule gives you remote control over a table, standard or ceiling lamp, while maintaining your existing switch.

Z-Wave ON/OFF relay module Z-Wave+ with built-in energy meter - 1x2300W

FIBARO Home Center 3 is one of the most advanced home automation controllers in the world. It offers *multi-protocol compatibility and incredible processing power.

Homey Pro + Ethernet Adapter package

With soft lines, a polished surface and small size, this smoke detector enables you to be alerted in the event of a fire.

FIBARO Walli Switch is a smart switch designed for quick installation in flush-mounted boxes. It can control one or two loads separately and is equipped with an LED ring, real-time consumption monitoring and known and recognised features of Fibaro modules.

The uniquely designed PSR04 Smart Color Button from Philip offers a range of features to control your home appliances

Thermofloor - Z-wave+ Hydronic controller for 10 outlets Heatit Z-Water 2

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Pack including the FIBARO Radiator Thermostat (Z-wave+) and the Bluetooth temperature sensor.

This pack includes 1 Home Assistant Voice Preview and 2 Home Assistant-compatible ESPHome Swiss plugs.

The MH10-PM air quality monitor from MCOHome will help you maintain good air quality in your room.

Fibaro - Z-Wave+ ON/OFF socket with French format consumption tracking Attention: This plug is not in Swiss format. It is designed for use abroad. It can be used in Switzerland in a foreign outlet provided that the foreign wall outlet is...

FIBARO Walli Switch is a smart switch designed for quick installation in flush-mounted boxes. It can control one or two loads separately and is equipped with an LED ring, real-time consumption monitoring and known and recognised features of Fibaro modules.

FIBARO Walli Switch is a smart switch designed for quick installation in flush-mounted boxes. It can control one or two loads separately and is equipped with an LED ring, real-time consumption monitoring and known and recognised features of Fibaro modules.

No more keys, use your smartphone to lock and unlock your door! Homekit model.