The MH-DT411-EU switch from the manufacturer MCOHome enables you to switch the connected load either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

No more keys, use your smartphone to lock and unlock your door! Z-Wave and Bluetooth model.

Z-Wave Touch Panel Switch, 3 channels. TPS03 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Three relay channels version

Applied to control water heating system like: wall mounted boiler, water valve/pump, under floor pipes, radiator systems, etc; and electrical system like: heating cable, electro-thermal film, heating actuator, electrical globe valve etc.

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 230 VAC powered version.

The Water Sensor 7 Pro is a sensor designed to detect drops and leaks and help mitigate water damage.

Refill UR Fog 500 ml for Modular 200 and Modular 300

JEEDOM LUNA is the new entry-level standalone and multi-protocol home automation box integrating Jeedom software.

FIBARO Walli Roller Shutter switch mechanism, delivered without finishing frame or knob, leaving you free to choose the Legrand Céliane or Schneider Odace finish.

PHILIO TECH PST02-1B Z-WAVE+ 3 in 1 detector: motion detector, temperature sensor and luminosity detector

This unique type of jet type water meter can be used to measure the volume of hot water (90°C max). It is fitted with a reed type bulb (ILST) pulse emitter.

FIBARO Walli Outlet is a smart outlet that allows you to control and manage the electric appliance connected to it. It is equipped with an LED ring, which informs you about the energy use. It can control a maximum load of 3680W (16A).

The Remotec ZXT-120 is a Z-Wave to IR converter to control your air-conditioning.

Z-Wave Touch Panel Switch, 1 channels. TPS01 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. One relay channel version

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

Z-Uno Shield is a multifunctional DIN-rail smart home device based on Z-Uno. It implements most useful features of Z-Uno and requires no soldering and no programming.

Aeotec TriSensor 8 was developed to detect ambient values and movement and to transmit them with Z-Wave Plus.

PHILIO TECH PST02-1B Z-WAVE+ 3 in 1 detector: motion detector, temperature sensor and luminosity detector

Z-Uno 2 is an easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired...

The WallMote Quad from Aeotec is a smart, portable, wall-mounted Z-wave controller.

This switch enables you to control 4 connected loads, either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

FIBARO Walli Outlet is a smart outlet that allows you to control and manage the electric appliance connected to it. It is equipped with an LED ring, which informs you about the energy use. It can control a maximum load of 3680W (16A).

The Z-Smoke is a smoke detector with integrated PIR that can also be powered at 230V. This way you can make your home a lot safer with one device, which also gives a comfortable feeling.

Controlled return HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control...

The Zooz ZSE70 outdoor motion sensor can be used with a compatible hub to automate lights, sirens, or even sprinklers to scare off an intruder.

The Siren 6 is the most connected alert system in the Z-Wave ecosystem.

Z-Weather is the world’s first energy-automated Z-Wave wireless solar powered Sensor.

The recess adaptor enables the MultiSensor 6 to be fitted into a ceiling or a wall.

The Z-Wave Plus motion detector PSP05-D from Philio can be used both indoors and outdoors. It is supplied with a magnetic mount fitting for easy installation and also includes a lens cover to enable you to exclude an area from the motion detector if so wished.

This unique type of jet type water meter can be used to measure the volume of cold water (30°C max). It is fitted with a reed type bulb (ILST) pulse emitter.

Pack including the FIBARO Radiator Thermostat (Homekit) and the Bluetooth temperature sensor.

No more keys, use your smartphone to lock and unlock your door! Bluetooth model.