Strips Guard 800 - the revolutionary magnetic sensor for monitoring windows, doors and valuables

Controlled return The FIBARO Radiator Thermostat (Homekit) is a remote-controlled thermostatic head to regulate the temperature in your room. It measures the temperature and automatically adjusts the heating, easy installation needing no tools

Controlled return This switch enables you...

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 12VDC powered version.

The Zooz ZSE70 outdoor motion sensor can be used with a compatible hub to automate lights, sirens, or even sprinklers to scare off an intruder.

The Aeotec Home Energy Meter 8 provides real-time insights into both your home’s energy usage and solar generation. Seamlessly integrating with SmartThings and offering exceptional measurement accuracy, it’s an ideal tool for smarter, more efficient energy management.

The NorthQ electricity consumption meter is designed to read the data provided by a traditional electromechanical or electronic meter equipped with an optical port.

The FGD-212 dimmer micromodule gives you remote control over a table, standard or ceiling lamp, while maintaining your existing switch.

Thermostat mural avac LCD compatible avec la technologie ZWave + actionneur pour chaudière

The recess adaptor enables the MultiSensor 6 to be fitted into a ceiling or a wall.

The Philio PAT02 enables a flood to be detected and the measurement of temperature and humidity using a single device connected to your Z-Wave network.

NorthQ gas reader is designed to read data from magnetic or electronic meters equipped with optical ports.

Z-Wave+ indoors surrounding temperature and humidity sensor

The FGS-223 micromodule Double Switch 2 allows you to remotely control two lamps or two devices remotly while keeping your existing switch.

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

The RaZberry 2 is an expansion board that connects directly to the GPIO terminal of a Raspberry Pi board and turns it into a Z-Wave controller

The PST02-1A sensor includes 4 different functions: motion sensor, opening sensor, temperature sensor and light sensor.

The Aeon Labs Energy Consumption Meter for single-phase systems enables controlling the energy consumed or produced for the monitored phase. Not suitable for three-phase systems.

The TZ55D-ZW5 switch allows you to dim or brighten any associated lighting, either manually like a conventional switch, or remotely via the Z-Wave+ wireless protocol.

The Aeon Labs electricity consumption meter enables you to check the amount of electricity consumed throughout the home, even for a three-phase installation. This device runs on mains electricity.

This switch enables you to control 4 connected loads, either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

The FIBARO Radiator Thermostat is an intelligent thermostatic head that controls the temperature in your room, using a built-in or external sensor and regulating the heat level according to your individual preferences.

This switch enables you to switch the two connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

The Danalock Universal Module V3 is the perfect solution for operating electronic devices such as garage doors and electronic locks with your smartphone.

This package includes the Secure SRT321 thermostat and the SSR303 receiver. It allows you to easily control your boiler. New version Z-wave+

The TriSensor is composed of 3 basic sensors/detectors to make your home smart: movement, temperature and luminosity. We offer you 1 x battery CR123 worth 4.90 CHF with each ZWA005 ordered from us.

RGB/RGBW Controller (Red, Green, Blue, White) Z-wave compatible with analog input sensors (FIBARO RGBW Controller 2).

The Heiman gas sensor is designed to prevent the risks caused by a gas leak. If gas is detected, a sound alarm will be triggered and a Z-wave signal sent to the main control box.

The Aeotec Range Extender 7 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Warning: This is not a Swiss format socket.

The Z-Smoke is a smoke detector with integrated PIR that can also be powered at 230V. This way you can make your home a lot safer with one device, which also gives a comfortable feeling.

Manage your smart home on-premises, privately, and without a cloud. The Z-Stick 7 allows you to create your own automation gateway using Z-Wave Gen7 and 700 technologies.

Refill UR Fog 500 ml for Modular 200 and Modular 300. Food Grade version. This type of anti-intrusion fluid is recommended to guard against theft in grocery stores, supermarkets, bars, restaurants or food warehouses.

Controlled return The FIBARO Home Center 3 is one of the most advanced home automation controllers in the world. It offers *multi-protocol compatibility and incredible processing power. <p...

The Z-TRV-V01 Smart Radiator Thermostatic Valve is designed to provide individual, room-by-room heating control.

The NorthQ electricity consumption meter is designed to read the data provided by a traditional electromechanical or electronic meter equipped with an optical port.