SR-ZG9032A-4IN1- Zigbee 4in1 sensor

This Zigbee sensor is a low-power 4-in-1 battery-operated device that combines a PIR motion sensor, temperature sensor, humidity sensor, and light sensor. The triggering and sensitivity of the PIR motion sensor can be configured.

The sensor supports a low battery alarm; if the power is below 5%, triggering and reporting of the motion sensor will be disabled, and an alarm will be sent every hour until the battery power exceeds 5%. The sensor is suitable for smart home applications that require sensor-based automation.

Features of the Zigbee 4-in-1 Multi-Sensor Sunricher SR-ZG9032A-4IN1

• Compliant with Zigbee 3.0 standard
• PIR motion sensor, long detection range
• Temperature detection, automate your home heating or cooling
• Humidity detection, automate humidification or dehumidification
• Brightness measurement, daylight harvesting
• Autonomous control based on sensors
• OTA firmware upgrade
• Wall-mounted installation
• Can be used for indoor applications

Technical Specifications of the Zigbee 4-in-1 Multi-Sensor Sunricher SR-ZG9032A-4IN1

• Operating voltage: 3VDC (2 AAA batteries)
• Standby consumption: 10uA
• Radio frequency: 2.4 GHz
• Wireless protocol: Zigbee 3.0
• Wireless range: 30m (line of sight)
• Motion sensor type: PIR sensor
• PIR sensor detection range: Max. 7 meters
• Recommended installation height: Wall-mounted, 2.4 meters
• Temperature range and accuracy: -40°C~+125°C, ±0.1°C
• Humidity range and accuracy: 0 – 100% RH (non-condensing), ±3%
• Brightness measurement range: 0~10000 lux
• Operating temperature range: 0℃ to 40℃ (indoor use only)
• Operating humidity: 0℃ to 40℃ (indoor use only)
• Water protection rating: IP20
• Dimensions: 55.5 x 55.5 x 23.7 mm
• Material / Color: ABS / White