Reconditioned - MCOHOME - Humidity, temperature and CO2 sensor with Z-Wave+ display (12VDC)
-10%
CHF159.00
CHF143.10
Tax included
With MH9-CO2 sensor by MCOHome, you can maintain good air quality in your room.
12VDC powered version.
In stock. Ordered before 5pm, delivered the next business day.
Air quality in a room is influenced by Carbon Dioxide (CO2). If the CO2 concentration is higher than 1.000ppm, there will be negative effects.
With MH9-CO2 sensor by MCOHome, you can maintain good air quality in your room. Apart from CO2MH9-CO2 also measures the humidity and temperature of your room.
The sensor uses Z-Wave to communicate and you can connect many other appliances to it. You can automatically switch on the fan or air conditioner after a given limit. You can also be alerted by an RGB light signal which uses different light colours to indicate different air qualities.
Features
- CO2 temperature and humidity sensor
- LCD monitor
- 2 control buttons
- Time and day of the week display
- Z-Wave plus compliant
- Installation on the wall
- Tempered glass finish
Technical specifications
- Module type: Z-wave transmitter
- Material: Tempered glass and plastic (PC Alloy)
- Power supply: 12 VDC
- Frequency: 868.42 Mhz
- Range: Up to 30m
- CO2 display range: 0-2000ppm
- Default limit: 1000ppm (adjustable)
- Temperature range: -9 to50°C
- Humidity range: 0 to 99%RH
- Dimensions: 90 x 130 x 28 mm
- Installation: Wall (Vertical), 60 or 82mm wall box
Specifications
| Protocol | Z-Wave Serie 500 |
|---|---|
| Type | Module Sensor |
| Function | CO2 Humidity Temperature |
| Gateway compatibility | Homey - total compatibility eedomus+ - total compatibility |
| Use | Temperature/Humidity/CO2 Monitoring |