Reconditioned - FIBARO - Smoke detector Z-Wave Plus FGSD-002 (FIBARO Smoke Sensor)

Controlled return

FIBARO SMOKE DETECTOR - WHEN SAFETY RHYMES WITH DESIGN and elegance

Featuring soft lines, a polished surface and a small size, this smoke detector will allow you to be alerted to a threat with multi-color RGB LEDs and a built-in siren. The large format of the grid makes it possible to detect the smallest amount of smoke in order to obtain a quick reaction. It will thus find its place in your home very easily to preserve the safety of the whole family.

The smoke detector FIBARO FGSD-002 is an Autonomous Smoke Alarm Detector (DAAF) compliant with EN 14604:2005. Although autonomous, it is also communicating thanks to Z-Wave Plus technology.

Some materials burn without smoking. That's why FIBARO engineers decided to include additional protection in their smoke detector in the form of a temperature sensor. If the amount of smoke is not enough to trigger the alarm, the device will still be able to detect a threat by detecting a rapid change in temperature caused by the fire. A rapid change in temperature or an increase to 54°C is enough for the smoke sensor to detect a threat and signal it to the inhabitants of the house. Only this type of smoke sensor offers high efficiency, regardless of what burns.

The sensitivity of the sensor can be adjusted depending on where it is installed. In the kitchen, a very sensitive sensor could trigger the alarm even when frying meat, which is why it should be less sensitive, helping to avoid irritating false alarms. In other rooms, where the presence of smoke is less likely under normal conditions, the sensor should be set to the maximum sensitivity in order to provide the best protection.

A "black box" integrated into the smoke detector records information on smoke and temperature levels. Whether the alarm system is armed or not, the sensor monitors the smoke level and sends information to the main controller periodically. Now you are able to detect even the smallest amount of cigarette smoke.

For your safety, and to ensure that the smoke detector works properly, it has been equipped with a range tester of the Z-Wave network. Z-Wave wireless mesh network communication allows you to stay connected with the controller over a long distance and through indirect connectivity, using other Z-Wave modules. The built-in LED will allow you to easily check if the sensor has a good range and can communicate with the home automation controller or requires a different location.

Features

• Z-Wave smoke detector
• Can be used with or without home automation controller.
• Battery powered
• Adjustable sensor sensitivity (3 levels)
• Protection against sabotage
• Sound-signaled alarm, LED light and Z-Wave signal
• Fire detection by air temperature measurement
• Automatic efficiency test, performed every 5 seconds
• Integrated "Black Box" - the sensor reports and records temperature and smoke data
• Integrated Z-Wave Network Coverage Tester
• Compliant with EN 14604:2005
• Compatible Z-Wave Plus
• Wireless update with the box FIBARO Home Center 2
• Very simple installation - just install it in a place where there is a risk of fire

Technical Specifications

• Module type: Z-Wave transmitter
• Power supply: Batterie Lithium 3V CR123A
• Battery life: 3 years
• Frequency: 868.42 MHz
• Transmission distance: 50m free field, 30m indoors
• Dimensions: 65 x 28 mm (diameter x height)
• Operating temperature: 0-55°C
• Operating humidity: 0% - 93%
• Temperature measurement range: -20 to 100°C
• Smoke sensitivity: 1st level - 1.20 +/- 0.5% obs/m; 2nd level - 1.80 +/- 0.5% obs/m; 3rd level - 2.80 +/- 0.5% obs/m
• Sound level: 85 dB at 3m
• Measurement accuracy: 0.5°C (in a range of 0 to 55°C)
• Standards: EMC 2004/108/EC and R&TTE 199/5/WE
• Certifications: EN 14604:2005