HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Remote control for roller shutter groups with Silent mode and lighting control

Compatible with all types of lighting (LED, compact fluorescent, halogen, etc.) Ideal for adding an additional control to lighting Allows the use of the same model of switch that already exists Allows the establishment of a time program and the remote control of lighting if it is connected to TYDOM

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Shelly RGBW 2 is a WiFi dimmer with 4 outputs (red, green, blue, white) to drive LED strips, 12/24V LED lamps, up to 288W (total power of the 4 channels). Official Shelly importer

Ideal for remotely controlling electrical equipment

Z-Wave Touch Panel Switch, 3 channels. TPS03 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Three relay channels version

The smart switch SONOFF offers the possibility to control a high-load device of his home and measure its energy consumption.

The FIBARO ROLLER SHUTTER 4 is a device designed to control roller shutters, venetian blinds, curtains and pergolas.

Operate the lighting of large rooms or corridors and exteriors thanks to this dual output module Compatible with the connected home application Tydom and Lifedomus

2 favourite roller shutter positions can be saved Feedback of the position of the roller shutter via a control panel or remotely Optimising the building’s energy effi ciency as no work is required for installation Very low energy consumption

Z-Wave Touch Panel Switch, 1 channels. TPS01 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. One relay channel version

Connected dimmer wireless equipment Compatible with variable lighting or dimmable bulbs (LED and halogen) Allows the creation of bright atmospheres adapted to the rhythm of life Conservation of existing equipment, installation behind the switch without work Energy-efficient modules Connected lighting

Radio room thermostat pack for reversible/non-reversible, single/multi-zone systems.

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 1-channel wet WS-NASS-103-RW is a battery-less and maintenance-free transmitter including a push-button fitted in a cover of the switch and socket line “robusto” of the company Hager AG. A variety of different printed inlays (blank, doorbell symbol, light symbol) come with the delivery.

The TYXIA 2600 can control the lighting, lighting dimming, roller shutters, control systems and scenarios. It is compatible with the following control types: Single or double switch. Single or double push-button. 3-way roller shutter switch.

Centralised control of outdoor control systems and lighting Easy to carry around thanks to its pocket size and its key ring fastener Impact resistant for daily use

Receiver 1 output 16 amps - automation control or heating Install it easily

Receiver for DALI lighting dimmer Order up to 20 lights Has a brightness variation range fineness

Wireless repeater Ideal for large accommodations or for business premises

Micromodule receiver dry contact output 10 A on /off + timer X3D This receiver is suitable for establishments receiving the public (ERP), thanks to its multiple functions This receiver warns you of the extinction of the lighting, in a room, corridor, stairwell ... This receiver is recommended to control a toilet or bathroom aerator, on detection of long...

EnOcean wall transmitter and switching actuator with power measurement.

Controlled return HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control...

The Omnio flush mounted multi universal dimmer 1-channel UPD230/10 with extension input is a device for dimming LED luminaires and other electrical loads.

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio handheld transmitter 4-channels R101 is a universally applicable battery-less and maintenance-free wireless switch with four independent individual keys. Due to its highly ergonomic shape it rests comfortably in ones hand. The power comes from a small energy converter based on the induction principle.

A new control point can be added very easily without altering the decoration Compatible with all types of lighting (LED, compact fluorescent, halogen, etc.)

Enables the replacement or addition of remote controls on an existing motor or electric strike Compatible with all garage door motor, gate or electric strike brands

2 favourite roller shutter positions can be saved Feedback of the position of the roller shutter via a control panel or remotely Optimising the building’s energy effi ciency as no work is required for installation Very low energy consumption

Easy to carry around thanks to its pocket size and its key ring fastener Centralised control of outdoor control systems and lighting Impact resistant for daily use