Sunricher - Zigbee 3.0 Dimmer module (with or without neutral)
The SR-ZG9040A-S is an innovative phase-cut dimmer with ZigBee control interface.
The SR-ZG9040A-S is an innovative phase-cut dimmer with Zigbee control interface. It operates at a voltage of 230VAC and has an output supporting a maximum load of 400 W. The SR-ZG9040A-S dimmer is compatible with the upstream (leading edge) and downstream (trailing edge) phase cut.
The innovative minimum brightness adjustment feature allows users to set a minimum brightness and move from that minimum brightness to 100% brightness. It is also easy to remove the minimum brightness. The dimmer can be controlled from your ZigBee home automation box or remote controls that are added to the network and are linked to the dimmer.
This Zigbee dimmer is based on the Zigbee 3.0 standard, it can be linked and controlled by up to 30 Zigbee remotes that supports the Zigbee Light Link standard via Touchlink. It also supports the new Zigbee Green Power feature and can bind and be controlled by up to 20 Zigbee Green Power remotes directly without a Zigbee hub or gateway.
Functions
- Zigbee Phase CutVariator based on the latest ZigBee 3.0 protocol
- Supports resistive loads, capacitive loads or inductive loads
- Output 1 channel, up to 400 W
- Entry and exit with screw terminals, safe and reliable
- Turns on/off and vary the light intensity of the connected light source
- Works with neutral or without neutral.
- Advanced microprocessor control
- Intelligent light source detection algorithm
- Active power and energy measurement function
- Progressive start function
- Innovative minimum variation level and start-up brightness adjustment function
- Works with a push switch only
- Zigbee device that supports Touchlink commissioning
- Can directly pair with a compatible Zigbee remote via Touchlink without coordinator
- Supports search and link mode to link a Zigbee remote
- Supports Zigbee Green Power and can link 20 Zigbee Green Power remotes
- Compatible with universal Zigbee gateways
- Mini size, easy to install in a standard-sized wall box
TECHNICAL FEATURES
- Food: 100-240VAC
- Out current: 1.5A max
- Variable-intensity LED lamps: 200W
- Dimmable LED Drivers: 200W
- Incandescent lighting, HV halogen lamps: 400W
- Low voltage halogen lighting with electronic transformers: 200W
- Radio frequency: 2.4 GHz
- Range: up to 30m
- Dimensions: 45.5 x 45 x 20.3 mm
- IP protection: IP20
Reviews (2) - Review moderation
Der Funk- Dimmaktor ist völlig unkompliziert zum Anschliessen. Bestehende Lichtschalter können durch Lichttaster ersetzt werden oder einfach durch smart Schalter (bsp. Feller Ediziodue smart light controll) welcher überhaupt nich an dem Funk- Dimmaktor angehängt werden muss. Der Aktor funktioniert auch problemlos ohne den neutralen Leiter. Einfach toll, wie dimmbare Lampen nicht durch Smarte Lampen ersetzt werden müssen und die Lösung in so einem Funk-Dimmaktor liegt. Auch das Koppeln an das Philips Hue System funktioniert einwandfrei....
Achat récemment effectué et le produit fonctionne comme requis. Il permet de rendre une installation classique compatible zigbee et variable si les ampoules le permettent. Il faut cependant s’assurer d’avoir des boutons poussoirs (chez feller, un petit levier permet de commuter entre poussoir et interupteur classique). Le module est aussi reconnu par le hub bridge 2 philips hue. Je les utilise avec le neutre donc pas besoin de bypass Sur des ampoules non variables uniquement et à l’extinction, il y a une très courte latence. A voir la tenue dans le temps.
-
Accessories
-
Frequently purchased together
-
Trending products
CHF39.90
