Control your devices remotely with the WiFi Matter connected switch MEROSS 16A + consumption measurement and HomeKit compatibility.

Z-Wave ON/OFF relay module Z-Wave+ with built-in energy meter - 1x2300W

The MH-DT411-EU switch from the manufacturer MCOHome enables you to switch the connected load either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

The PiZiGate connected to your Rapsberry Pi allows you to integrate your ZigBee compatible objects into your home automation environment.

Z-Wave Touch Panel Switch, 3 channels. TPS03 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Three relay channels version

Applied to control water heating system like: wall mounted boiler, water valve/pump, under floor pipes, radiator systems, etc; and electrical system like: heating cable, electro-thermal film, heating actuator, electrical globe valve etc.

The SR-ZG1029-5C is a 4-in-1 LED light controller based on the Zigbee 3.0 standard.

FRIENT - ZIGBEE 3.0 MOTION DETECTOR + TEMPERATURE AND BRIGHTNESS SENSOR The motion detector FRIENT lets you know if there is movement in your home and informs you of the temperature and brightness measured in real time.

Smart and rugged camera for harsh conditions 2MP - AI - 140dB WDR - 0.002Lux Ultra Low-light - EN50155 - IP67 - IK10 - IR Distance 30m - 60fps - Versatile interfaces AI Vandal-proof Mini dome Series

Refill UR Fog 500 ml for Modular 200 and Modular 300

The Meross MSL610HK smart floor lamp is a contemporary and versatile lighting solution designed to provide efficient lighting and smart functions for your home. Cool and warm white Adjustable brightness Voice control and APP Programming 2.4GHz WiFi ...

A smart water leak sensor is designed to help detect and alert you to potential water leaks or flooding in your home. This device is valuable for preventing water damage and mold growth by providing early warnings. Alarm maximum 60dB. CR123A battery is not included. Works with Apple HomeKit and SmartThings. The Hub is not...

The RG-RAP2266 is a high-performance, dual-radio, ceiling-mounted Wi-Fi access point designed to cover a large or medium-sized indoor area. The access point operates with either IEEE 802.3at PoE power or a local 12 V/2 A power supply. Wi-Fi 6 omnidirectional AP Wi-Fi data rate up to 3000 Mbps Frequency 2.4 and 5 GHz / 160MHz Channel width ...

IntelliTAG anti-intrusion sensor is the only window or door sensor that alerts you of a break-in attempt BEFORE an intruder gets inside. This pack contains 5 IntelliTAG.

Z-Wave Plus carbon monoxide detector with built-in battery and temperature gauge.

This revolutionary wall switch lets you switch the 4 connected loads, either manually like a conventional switch, or remotely via WiFi. It is equipped with an incredible quantity of functions and innovations while remaining easy to use.

The Shelly RGBW 2 is a WiFi dimmer with 4 outputs (red, green, blue, white) to drive LED strips, 12/24V LED lamps, up to 288W (total power of the 4 channels). Official Shelly importer

Z-Wave Touch Panel Switch, 1 channels. TPS01 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. One relay channel version

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 230 VAC powered version.

Z-Uno Shield is a multifunctional DIN-rail smart home device based on Z-Uno. It implements most useful features of Z-Uno and requires no soldering and no programming.

4K H.265 Mini NVR 1000 Series Ultra-mini Size 4/8-CH Video Input · Up to 10TB Storage · Ultra-mini Size · Decode up to 1-CH 4K UHD & 4-CH 1080P · ANR · Versatile Interfaces Mini NVR 1000 Series

Z-Uno 2 is an easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired...

The badge activates or disarms the alarm.

IntelliTAG anti-intrusion sensor is the only window or door sensor that alerts you of a break-in attempt BEFORE an intruder gets inside.

This switch enables you to control 4 connected loads, either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

The gateway zigate allows you to interface your ZigBee-compatible objects® to your computer or home office box. Version Rail DIN

The MDT variation actuator receives KNX/EIB telegrams and varies up to 4 independent electrical charges. Each output can be manually controlled by a push button.

Depending on its setting, the glass push button II Lite MDT issues KNX telegrams. Sensor areas can be programmed for 1- or 2-button operation (BE-GTL4xx.01: 4 single-sensor buttons). RGBW state LEDs can be controlled by internal or external objects. The brightness of the LEDs can be controlled via a day/night object or a brightness object. Besides switching, dimming, blinds, scenes, or...

Connection possibilities: LAN (RJ45) Power Supply: 802.3af PoE Sensor Resolution: 4 Megapixel Day/night function: IR filter & IR LED Built-in microphone and speaker Vandalism Protection IK08 Power supply with 802.3at PoE

Connection possibilities: LAN (RJ45) Power Supply: 802.3af PoE Sensor Resolution: 4 Megapixel Day/night function: IR filter & IR LED Built-in microphone, managed by UniFi Protect software

AI IR mini-dome network camera Intelligent and superior IR performance in the dark 8MP - AI - 140dB WDR - 0.002Lux Ultra Low-light Smart IR II - IR Distance of 20m - 60fps - PoE AI Mini Series

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.