Trio2sys - Modular 1-channel mixed EnOcean radio timer receiver
The ENOCEAN 1-channel modular mixed remote switch receiver with timer is used to switch various 230V load electrical devices from an ENOCEAN radio transmitter or sensor without batteries and wires or wired push button
Trio2sys EnOcean Din rail radio combination step relay receivers
The modular 1-channel mixed remote switch receiver is used to receive radio signals from switch transmitters or sensors and to connect wired pushbuttons and, if necessary, increase the range between the transmitters and other O2line receivers.
It allows the switching of resistive loads, ferromagnetic and electronic lamps, power contactors or small motors.
In combination with BMS products as a sensor, an acknowledgement can be obtained at each change of status or access to advanced functions such as the radio test function.
Before use, the transmitters must be assigned to a receiver. Each sensor or transmitter can control an unlimited number of receivers.
TIMER MODE :
The status of the receiver changes automatically after the user-defined time interval.
TELERUPTEUR MODE:
Each press of the connected switches and wired pushbuttons
switches and wired pushbuttons reverses the state of the receiver.
Characteristics
- Transmission frequency 868.3MHz
- EnOcean Equipment Profile (EEP) D2-01-01
- Power supply 230V AC / 50Hz
- Output load
- max μ10A/2300VA resistive (cos =1)
- 800W incandescent/halogen
- 300W inductive (cos =0.4 to 0.6)
- 500W/800W low voltage halogen
- 600W fluorescent
- Colour ABS white
- Operating temperature -10 to +45°C
- Relative humidity 0% to 75% (non-condensing)
- Product dimensions 17.5x97.4x66.4 mm
-
Accessories
-
Frequently purchased together
-
Trending products
CHF39.90
