Reyee Cloud Switch 16 Gigabit RJ45 ports Port speed 10/100/1000 Mbps Plug & Play VLAN/Port Isolation/Loop Detection Port Speed Limit

Reyee Cloud Switch 2+ 24 Gigabit RJ45 ports 4 SFP+ 10 Gbps ports Static LAG/DHCP Snoop/IGMP Snoop/Port Mirror VLAN/Port Isolation/STP/RSTP/ACL/QoS Rack-mountable

Reyee High Density Omnidirectional Wi-Fi 6 Access Point 2.4 and 5 GHz Frequency Supports 802.11a/b/g/n/ac/ax Transmission speed up to 3200 Mbps 4x4:4 MIMO antennas at 2.4GHz, 4x4:4 at 5GHz

Reyee Omnidirectional Wi-Fi 6 AP Suitable for outdoor use IP68 UFO Design Supports 802.11a/b/g/n/ac/ax Transmission speed up to 1775 Mbps 2x2 MIMO Antenna

Qubino wired built-in opening sensor

DIN Z-Wave+ module able to transmit the different control cable commands for an electric radiator.

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 12VDC powered version.

The MDT Time switch with 20 channels (6 cycle times each channel) has a daily/weekly/astro switching function and an adequate power reserve if the bus voltage fails. The cycle times of the single channels are adjustable by the ETS or can be set directly at the device. The large LCD display for comfortable handling allows direct switching of the 20 channels (Manual Mode).

The MDT variation actuator receives KNX/EIB telegrams and varies up to 4 independent electrical charges. Each output can be manually controlled by a push button.

The push button MDT Glass releases KNX telegrams after touching the sensor areas on top, the operation to 1 or 2 buttons can be set.

The automatic motion sensor/switch MDT with light sensor captures the smallest movements thanks to its built-in pyrotechnic detectors and high-resolution lens. It is possible to configure 2 separate light channels, an HVA channel and a channel for room monitoring. The brightness of the...

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electric charges. Each output uses a relay (AKK-01UP.03: bistable relay, AKK-02UP.03: monostable relay). The outputs are parameterized individually via ETS. The device offers extensive functions such as...

Depending on its setting, the glass push button II Lite MDT issues KNX telegrams. Sensor areas can be programmed for 1- or 2-button operation (BE-GTL4xx.01: 4 single-sensor buttons). RGBW state LEDs can be controlled by internal or external objects. The brightness of the LEDs can be controlled via a day/night object or a brightness object. Besides switching, dimming, blinds, scenes, or...

The smart keyboard Philio with a sleek glass touchscreen can be included in your Z-Wave network to increase security in your home.

Refill UR Fog 1000 ml for Modular 800

Refill UR Fog 1000 ml for Modular 800. Food Grade version. This type of anti-intrusion fluid is recommended to guard against theft in grocery stores, supermarkets, bars, restaurants or food warehouses.

This Z-Wave expansion module allows the Zipabox 2 to communicate with Z-Wave-compatible devices and integrate them into a unified home automation network.

The mixed remote switch receiver is used to switch various electrical devices from wired pushbuttons or from EnOcean wireless switches.

The AI Fisheye network camera was born to bring a panoramic experience that would easily achieve the effect of more than 4 network cameras.

The MS-N5008-UPC is an 8-channel network video recorder (NVR) with 4K output, H.265+ compression, and storage capacities up to 20TB, ideal for advanced video surveillance.

The FGS-223 micromodule Double Switch 2 allows you to remotely control two lamps or two devices remotly while keeping your existing switch.

This revolutionary wall switch lets you switch the 4 connected loads, either manually like a conventional switch, or remotely via WiFi. It is equipped with an incredible quantity of functions and innovations while remaining easy to use.

With this sensor, you will be able to easily monitor and control the climatic conditions of your home. It integrates perfectly with our smart home ecosystem, allowing you to automate the temperature and humidity settings of your home for optimal comfort. Monitor temperature and humidity. Powered by CR2477 battery or solar energy. Works with Apple HomeKit...

SLZB-MR3 is a Zigbee and Matter Over Thread dongle via Ethernet POE with 2 chipsets CC2674P10 + EFR32MG24 compatible with Zigbee2Mqtt and Home Assistant.

Enjoy a powerful multiradio coordinator with the SMLIGHT SLZB-MR4 adapter, featuring Zigbee 3.0 and Thread (Matter-over-Thread) chips, compatible with Zigbee2MQTT and ZHA, with USB-C or PoE power supply.

The Aqara W600 radiator thermostat turns your traditional heating into a smart system with automatic room-by-room management for maximum energy savings. Spatial Intelligence: presence detection and automatic room management Dual Thread/Zigbee protocol (Zigbee requires an Aqara Hub) with Matter support Ultra-precise control in 0.5°C increments ...

This revolutionary wall switch lets you switch the 4 connected loads, either manually like a conventional switch, or remotely via WiFi. It is equipped with an incredible quantity of functions and innovations while remaining easy to use.