FIBARO Walli Outlet is a smart outlet that allows you to control and manage the electric appliance connected to it. It is equipped with an LED ring, which informs you about the energy use. It can control a maximum load of 3680W (16A).

Controls an auxiliary light remotely Perfect for switching a difficult to access light on or off Also operates as a standard switch Compatible with all types of lighting (LED, compact fluorescent, halogen, etc.)

Operate the lighting of large rooms or corridors and exteriors thanks to this dual output module Compatible with the connected home application Tydom and Lifedomus

Lock or unlock your Danalock very easily thanks to the Danapad V3 keypad.

The FGDW-002-3 from Fibaro is a Z-wave PLUS window/door opening sensor fitted with a temperator sensor.This new version is more compact than the previous one.

The Z-Wave Plus motion detector PSP05-D from Philio can be used both indoors and outdoors. It is supplied with a magnetic mount fitting for easy installation and also includes a lens cover to enable you to exclude an area from the motion detector if so wished.

The Aeon Labs electricity consumption meter enables you to check the amount of electricity consumed throughout the home, even for a three-phase installation. This device runs on mains electricity.

The FIBARO KeyFob remote control has 6 buttons allowing you to control all your equipments and run scenarios.

PHILIO TECH PST02-1B Z-WAVE+ 3 in 1 detector: motion detector, temperature sensor and luminosity detector

Z-Uno 2 is an easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired...

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

Qubino wired built-in opening sensor

The IPX800 V4 relay board from GCE Electronics enables you to control appliances, lighting, heating, watering, roller shutters, automatic gates, etc. via your smartphone, tablet or computer. A wide range of add-ons can be added to further extend its functions.

PHILIO TECH PST02-1B Z-WAVE+ 3 in 1 detector: motion detector, temperature sensor and luminosity detector

The Philio PAT02 enables a flood to be detected and the measurement of temperature and humidity using a single device connected to your Z-Wave network.

Enjoy a powerful multi-radio coordinator with the SMLIGHT SLZB-MR4U adapter, Zigbee 3.0 and Thread (Matter-over-Thread) chips, Zigbee2MQTT and ZHA compatible, with USB-C or PoE power supply and USB over TCP function.

Automate the watering or filling of your tanks with the Apollo PUMP-1 fluid pump + water level detection.

The M-1 LED Matrix Controller fromApollo Automation is the intelligent solution for bringing your HUB75 LED panels to life. Designed specifically to offer optimum compatibility with professional LED matrices, this compact controller transforms any HUB75 panel into an intelligent, customizable display. Controller only. To be completed, for example, with an...

Automate your roller shutters with the MEROSS Matter WiFi roller, intelligent control, light measurement, and multi-platform compatibility.

2-channel shutter management actuator with two inputs for conventional shutter push buttons, two electronic outputs 230 V~ / 2 A, power supply voltage 230 V

1 m (approx. 3 feet) stainless steel food probe with NTC sensor

Aqara Smart Lock U200 Lite Kit (EL-D03D), support Matter over Thread, App Bluetooth Unlock, Quiet Mode, Auto Lock, Remote Control, Rechargeable Li-ion Battery. Official Aqara importer

Aqara Smart Lock U200 Lite Kit (EL-D03D), support Matter over Thread, App Bluetooth Unlock, Quiet Mode, Auto Lock, Remote Control, Rechargeable Li-ion Battery. Official Aqara importer

Reyee Desktop PoE Switch 8 RJ45 ports + 1 RJ45 Uplink + 1 SFP Uplink 8 Gigabit Ports + 2 Gigabit Ports 8 PoE+ Ports 802.3af/at | Total power 120W Port isolation / Flow control / PoE monitoring Plug and Play

Controlled return The NS-2 is a 2-wire...

Controlled return The Z-TRV-V01 Smart...

JEEDOM ATLAS is the new home automation box integrating the Jeedom software. Version with Zigbee controller.

The Akuvox S565W is a 10-inch SIP video indoor monitor designed for intercom systems and high-end residential home automation. Running on a Linux operating system, this multifunctional communicator stands out with its high-resolution IPS touchscreen (1280x800 pixels) and elegant industrial design. As an official Akuvox...

The Rithum switch table stand allows users to place a switch anywhere in a room. Switches can be placed on a side table, next to the sofa or on a bedside table, so that lighting, audio and climate control are always within easy reach.

Aqara's G5 PRO PoE camera (CH-C03DW) is an advanced surveillance device that doubles as a Zigbee hub, Matter controller and Thread router, giving you total control of your connected home. Official Aqara import